FULL AUTOMATIC PLASTIC THERMOFORMING MACHINE TQC-650B

FULL AUTOMATIC PLASTIC THERMOFORMING MACHINE TQC-650B


Ocena klientów:

$130,613.80



Qty

PayPal

Application:
Thermoforming machine designed for the production of plastic containers - PP / PS, mainly cups for beverages, margarines, etc.
The sheet material is applied to a matrix on which the containers are formed under the influence of temperature and compressed air.
The cutting and cooling of the product takes place in the same place.
Functions:
The device is easy to use, controlled by the Siemens touch screen.
Its low advantage is its low noise level.
The use of different matrices allows the production of various packaging, e.g. plates, bowls and other containers.
Forms prepared for an individual customer's order.
Technical parameters:
Power: 98kW
Forming surface: 650mm x 320mm / 25" x 12"
The maximum embossing depth: 125mm/ 5"
Working speed: up to 35 cycles / min.
The width of the sheet: 650mm/ 25"
Film thickness: 0.3-1.8mm/ 0,01-0,07"
Dimensions [length x width x height]: 6000 x 2000 x 2700mm/ 236" x 79" x 106"
Auxiliaries:
Compressor:

Power: 22kW
Power supply: 380V / 50Hz/ 110 V
Pressure: 0.8 MPa
Capacity: 3.6m3 / min.
Dimensions: 1150 x 900 x 1350mm/ 45" x 35" x 53"
Weight: 580kg/ 1278 Ib
Cooling device:
Power: 4.3kW
Power supply: 380V / 50Hz/ 110 V
Pressure: 0.8 MPa
Yield: 3m3 / min.
Water tank capacity: 80 L
Dimensions: 1250 x 750 x 1350mm/ 49" x 29" x 53"
Weight: 175 kg/ 385 Ib
Air tank:
Capacity: 1.0m3
Pressure: 0.8Mpa
Temperature: 150 C
Height: 2400mm/ 94"
Inner diameter: 800mm/ 31"
An air inlet:
Height: 731mm/ 29"
Diameter: 80mm/ 3"
Air outlet:
Height: 1920mm/ 75"
Diameter: 80mm/ 3"

Specific References